Home /
Water Purification System
/ Ultrapure Water Purification System
/ Low TOC Ultrapure Water System WPS67-090V
Low TOC Ultrapure Water System WPS67-090V
Ultrapure water system is sub-economic choice for high grade experiments. This level of purification is required for advanced analytical techniques, such as HPLC, and is commonly used for semi-conductor manufacturing.
Used in Laboratory, Manufacturing, Reefkeeping, Aquarium, Laboratory, Research
Also known as Laboratory Ultrapure water system
- With distilled water,deionized water or reverse osmosis water inlet,to produce high pure water and ultrapure water
- High pure water‘s quality is above10 MΩ.cm,and ultrapure water´s quality can reach to18.2 MΩ.cm.
- Unique design and easy-to-replace cartridges pack unit.
- Data storage and RS 232/USB communication port.
Features
- With distilled water,deionized water or reverse osmosis water inlet,to produce high pure water and ultrapure water
- High pure water‘s quality is above10 MΩ.cm,and ultrapure water´s quality can reach to18.2 MΩ.cm.
- Unique design and easy-to-replace cartridges pack unit.
- Data storage and RS 232/USB communication port.
- 3 way on-line water quality sensor,multiple alarm.
- Life-span of cartridges´ display and alarm.
- System circulation function,system sterilization procedure.
- The graphic display clearly indicates all system´s parameters. From water quality to knowing when it is time to change the purification pack,you´ll see at a glance what is need.
- For ease-of-use,the main purification technologies are contained in an innovative all-in-one pack that mean you can change it in just a couple of minutes.
- The system requires no special installation,connect the system to your tap water supply it´s ready to use.
Specifications
| Feed Water Requirements*: | |
| Water Inlet | Tap water |
| Temperature | 5-45°C |
| Pressure | 1.0-4.0Kgf/cm² |
| Bacteria | <0.1 cfu/ml |
| DimensionLxWxH | 570x600x1500 mm |
| Weight | 60 kg |
| Power Consumption (W) | 240 W |
| Power Supply | AC110-220 V, 50/60 Hz |
| Note | *The quality of output water accords with the quality of inlet water. |
| Ultrapure Water Quality: | |
| Heavy Metal Ion | <0.1 ppb |
| Endotoxin | <0.001 EU/ml |
| Rnases | <0.01 ng/ml |
| Dnases | <4pg/µl |
| Feed Water Requirements: | |
| Output | 90 L/hrs at 25°C |
| Flow rate (with pressure tank) | - |
| Resistivity (25°C) | 18.2 MΩ.cm |
| TOC* | 3 ppb |
| Particle (>0.1µm) | <1/ml |
| Conductivity of RO water quality | < tap waterx4% |